Tormek Square Edge Jig.                            Conventional jigs.                                           Safety stops (1) prevent the  
                                                                        (Angle exaggerated for clarity.)                   tool from sliding off the grindstone
                                                                                                                                                     and scrape your knuckles.

Features:
• With the T-3 you get access to the Tormek high quality sharpening system at a favourable price and it is ideal for sharpening woodworking hand tools, knives and scissors.
• The new T-3 model improves the accuracy and safety when sharpening wood chisels and plane irons thanks to the Square Edge Jig SE-76, which is used at the shaping and sharpening of the edge.
• Honing on the leather honing wheel is carried out without the jig and with the Universal Support as a tool rest.
• Conventional jigs on the market require that you align the tool in the jig with two mounting screws which is time consuming and you lose the exact repeatability when re-sharpening.
• The new Tormek Square Edge jig solves this problem and the chisel will be lined up squarely, i.e. at 90 degrees, each time without any adjustments.
• This is achieved because the jig automatically aligns the chisel to its flat, machined face.
• Another benefit is that the SE-76 can also clamp short and tapered tools firmly, e.g. Japanese chisels.
• The jig copes with blades up to 76 mm or 3" width.
• The new Square Edge Jig SE-76 has safety stops, which prevent the tool from slipping off the stone, which can hurt your fingers.

Improvements of the T-3 model

• Stainless steel hardware
  - Prevents from rust and wear on bearings.

    

• Universal Support with acme thread
  - Round section without flat machining makes it faster to change position.

     

• Improved Horizontal Base
  - Double locking screws and tighter fit for highest precision.

• Micro Adjust with scale
  - For a predetermined cutting depth when using the TT-50 Truing and Dressing Tool.

       

Spefications:
• Dimensions:
    - Width : 230 mm ( 91/16" )
    - Depth : 200 mm ( 77/8" )
    - Height : 260 mm ( 10¼" )
• Grindstone
    - Aluminium oxide
    - Ø 200 × 40 mm ( 8" × 15/8" )
    - 120 rpm, torque 8.4 Nm
• Leather Honing Wheel
    - Ø 145 × 26 mm ( 5¾" × 1" )
• Motor
    - Industrial single phase
    - 120 W ( input )
    - 230 V, 50 Hz or 115 V, 60 Hz
    - Duty 30 min/hour
    - Maintenance free
    - Silent running, 52 dB
    - 25,000 hour life
• Housing ABS plastic
• Weight : 7.4 kg

The T-3 model is delivered with these accessories:

7 YEARS WARRANTY