Features:
• Level, Plumb and Square Beams:
- Dot (pointing), two adjustable line lengths and three speed spin modes allow customization of the beam length and brightness to meet specific level, plumb and squaring applications and lighting conditions.
• Vertical and Horizontal Operations:
- Interior levelling, layout and drop ceiling applications are a snap with the rugged RT-3620-2 plumb rotating beam.
- For applications that require better laser beam visibility, the scan/dither mode provides a brighter beam.
- The included Laser Detector (RT-A1655) allows the RT-3620-2 to be used for exterior applications at ranges up to approximately 600'(180m) (diameter). - The horizontal beam provides the capability for vertical, plumb and 90 degree layouts.
• Levelling:
- Three precision bubble vials and levelling screws allow for repeatable levelling in level and plumb modes.
• Laser Detector:
- Included laser detector with 2 sided LCD display allows for beam detection in lighting conditions where the beam is not visible, even in bright sunlight.
• Built in Tripod Mount:
- The built-in 50' x 11 tripod mount fits most standard tripods.
Specifications:
• Accuracy: +1- 1114" (6mm) @ 100' (30m)
• Leveling: Three precision vials and levelling screws
• Three Modes of Operation: Dot (Pointing), Adjustable line dither/scan (2 lengths, 30' & 60'); Three speed spin (200, 450, 60Orpm)
• Operating Range: Up to 600'(1 80m) with laser detector (RT-A1655) • Environmental: Dust, dirt and water resistant
• Laser Diode: Class IIIA; 635 rim diode
• Tripod Mount: 114" x 20 and 50' x 11
• Operating Temperature: 14F (A O'C) - 45F (1 13'C)
• Unit Power Supply: 2 "D" batteries (not included)
• Laser Detector Power Supply: 9V battery (alkaline or rechargeable)
• Laser Detector Low battery indicator: LCD display icon (± 4 hrs. remaining)
• Dimensions: 6in.x4in.x5.5 in.(15.25cmxlOcmxl4cm)
• Includes: Laser, laser detector (RT-Al 655), laser target, laser enhancement glasses, rod bracket, user guide and kitbox
Applications:
• Carpentry
- Level and set cabinets and countedops;
- Install trim and millwork;
- Level, square and plumb decks;
- Plumb framing and partition walls.
• Concrete
- Set forms and footings.
• Electrical
- Level electrical outlets;
- Cheek conduit clearance;
- Layout conduit and wiring;
- Transfer lighting layout from floor to ceiling.
• Flooring
- Layout tile and flooring.
• Plumbing
- Layout piping, sewer lines, drainage and feed lines;
- Set grade.
• Other
- Set ridge beams;
- Install siding, wall tile and masonry walls;
- Set landscape grade;
- Install drop ceilings;
- Layout walls;
- Locate finished floor elevations;
- Layout duct work and more!
1 YEAR WARRANTY
