Grabits Patented two-step process makes it easy to extract damaged screw heads - especially those that have completely hollowed out heads.
Grabit is made from high quality steel and is designed to be used in a variable, reversible drill.
GRABIT is also effective using a 1/4" hex screwdriver and be conveniently attached to a 1/4" quick connect system.
GRABIT removes many type fastners including Phillips, Slotted, Hex, Torx, Tri-Wing, Pozidrive, Frearson, most tamper resistant screws and many more.
Remove damaged screw heads and extract free spinning screws with GRABITฎ!
No other screw extractor removes damaged heads AND extracts free spinning screws!
Simple, fast and easy to use!
Easily removes No. 6 to No. 14 screws
The applications are infinite! Automobiles, toys, furniture, appliances & more!
GRABIT extracts screws easily from wood, metal or plastic and removes screws made of any alloy, including soft screws.
How It's Used - Operating Instructions
Insert GRABIT directly into drill or quick-change chuck-Burnishing end is showing
Set drill for reverse (counterclockwise).
Place Burnishing end of tool into damaged screw, slowly clean inside screw head until smooth.
Note: Burnishing tool end in not to be used to drill a hole.
Removing
Remove Burnishing end from chuck, flip tool, replace into drill chuck-Remover end now showing.
Maintain reverse setting (counterclockwise).
Place Remover end of tool into now smooth screw head.
Apply firm downward pressure, drill at slow speed. Apply lowest level of power to the hand drill.
Remover end of GRABIT will thread into screw head and remove.
Reusable
The GRABIT Damaged Screw Remover is reusable. Clean chips off toll and lubricate with oil after use.
